Authorized:
Hoist Fitness Club Line Biceps Curl CL-3102
Hoist CL-3102 Bicep Curl Machine for Sale
The Hoist CL-3102 is a seated biceps curl machine from Hoist's Club Line, built for commercial gym floors, boutique studios and well-equipped home rooms. It holds the upper arms on an angled wrap-around pad so the elbows do the work, and load changes are made from the seat without leaving the machine.
Key Facts Before You Buy
- Exercise—Seated biceps curl
- Resistance—Slide Select weight system
- Load changes—Made from the seat
- Frame line—Hoist Club Line
- Use rating—commercial and light commercial
- Ordering — Private invoice through HHF
- Best fit—Busy floors and home gyms
A Stack With No Pin or Guide Rods
Almost every selectorized curl machine works the same way: a pin drops into a plate, and the plates ride up and down a pair of steel guide rods. The CL-3102 has neither. Hoist replaced both with the Slide Select System, a leverage-based weight mechanism that carries the load without rods to track along or a pin to insert.
That changes what you are actually buying. The two parts of a stack machine most likely to interrupt a training session are the pin that goes missing and the rod that starts to bind. Neither part is on this frame. Hoist states the design reduces friction points and cuts maintenance, and its own lab testing measured Club Line machines at roughly 30% quieter on average from the user's position during a rep—a manufacturer result rather than an independent one, but it matches what the mechanism is built to do.
Does removing the guide rods affect stability? No. Stability on this machine comes from the frame mass and the floor anchoring Hoist requires, not from the stack hardware. The rods never carried the machine; they only guided the plates.
The practical payoff sits in the load steps. Because the system does not rely on a fixed plate-and-pin arrangement, Hoist offers adjustment in five-pound increments on its 200- and 300-pound systems. On single-joint work like a curl, that is the difference between a jump you can make and a jump you cannot. Choose the CL-3102 if downtime and load resolution matter more to you than owning the familiar rod-and-pin design. If you are still weighing mechanisms, the wider range of selectorized curl stations shows how the conventional approach compares, and Hoist's full equipment range covers the pin-loaded lines alongside this one.
What Independent Arms Change
Each arm on the CL-3102 travels on its own. There is no shared bar linking the two sides, so neither arm can quietly take over when the other tires. That is the honest trade behind the feature bullet every listing repeats without explaining.
Here is what it means in a working set:
- Set the seat so your armpits rest at the top of the pad.
- Curl both arms and watch which side stalls first.
- Set your load to what the weaker side can finish cleanly.
- Add single-arm sets on that side to close the gap.
What happens if one arm is stronger than the other? The stronger arm finishes its reps and the weaker one grinds. That is useful information rather than a fault—a fixed bar hides the gap, while independent arms surface it on the first set.
The rotating handles let your forearm position settle where it wants to sit as the arm travels, so the wrist is not locked into one angle from bottom to top. If you would rather load both arms through a single bar, the Hoist Biceps Curl RS-2102 and a traditional preacher curl bench both do that job instead.
Key Features
✅ No selector pin to lose or jam
✅ No guide rods needing routine lube
✅ Quieter sets in shared training rooms
✅ Load changes made without standing up
✅ Finer jumps for slow, steady progress
✅ Each arm is accountable for its own work.
✅ Grips rotate as the arms travel.
✅ Wrap-around pad keeps upper arms parked
✅ Seat height matched to the lifter
✅ Compact frame for tight floor plans
✅ Steel frame built for daily club use
✅ Coverage written for paying facilities
Full Specifications
Every figure below comes from Hoist's published specification for this model. Both unit systems are shown as Hoist prints them.
Size and Footprint
- Length—54.25" (138 cm)
- Width—43.50" (111 cm)
- Height — 48.50" (123 cm)
- Machine weight—481 lbs. (218 kg)
Resistance and Load
- Weight stack — 200 lbs. (91 kg)
- Load steps—Five-pound increments
- Per handle—100 lbs at full stack
Adjustment and Setup
- Arm pad — Wrap-around, 40 degree angle
- Exercise arms—Independent, rotating handles
- Seat adjuster — Gas-spring assisted, easy-reach handle
- Seat positions — Seven numbered settings
- Installation — Bolted down, two people
Warranty and Ordering
- Warranty — Original purchaser, factory defects
- Coverage scope — Workmanship and materials
- Specifications—Subject to change by Hoist
Ready to move? Add the CL-3102 to your cart at Hamilton Home Fitness, and read the shipping and returns policy first if you plan to specify a frame or upholstery color, since freight and restocking terms are worth knowing before a heavy machine leaves the warehouse.
Who It Fits and Who It Does Not
A good fit for you if:
- You run a floor where stations must stay usable
- You want small load jumps on arm work
- You train users of noticeably different sizes
- You want each arm loaded on its own
- Noise carries in your training room
Look elsewhere if:
- You need a published range-of-motion adjustment
- Your users cannot reach a fixed pad angle
- You want one frame for arms and triceps
- You cannot bolt equipment to the floor
Two gaps deserve a plain statement. Hoist publishes no maximum user weight for this frame anywhere — not in the specification, not in the manual. It also publishes no starting-position adjustment, so the fit is made by moving the seat rather than by moving the pad. Buyers who need an adjustable start should keep looking through the curl machine category instead.
How It Compares on Load Selection
The clearest way to separate these three is how the weight gets chosen, since that decides both the step size and what can go wrong on a busy day. The Hoist Preacher Curl/Triceps Extension HD-3100 is worth a look too if one frame has to cover both arm exercises.
Hoist CL-3102
- Weight selection — Slide Select, no pin
- Price — $4,400.00
- Best fit — Busy shared training floors
Hoist Biceps Curl RS-2102
- Weight selection — Pin and weight stack
- Price—$5,226.00
- Best fit—Buyers wanting Roc-It seat travel
BodyKore GR609 Bicep Curl
- Weight selection — Pin and weight stack
- Price—$3,245.00
- Best fit — Lower spend on one station
Weigh the three against your own floor before deciding — the BodyKore GR609 Selectorized Bicep Curl saves real money if a conventional stack suits you fine.
Frequently Asked Questions
Is the CL-3102 a preacher curl machine?
Yes, in everything but the product name. Hoist's own specification sheet titles this model a Preacher Curl, while the product listing calls it a Biceps Curl. The arm pad holds the upper arms in the preacher position either way.
Does it have to be bolted to the floor?
Yes. Hoist's owner's manual instructs owners to anchor the unit to the exercise floor using bolts of at least four and a half inches to prevent tipping. Plan the placement before delivery, because moving it afterwards means undoing the anchors.
How many people are needed to assemble it?
Two. Hoist's manual lists a ratchet wrench with half-inch, nine-sixteenths and three-quarter-inch sockets, an adjustable wrench, a rubber mallet, a tape measure, a level and an SAE hex key set, and it ends with a squareness check.
What is the maximum user weight?
Hoist does not publish one for this machine. It appears in no Hoist document we can find, so we will not quote a number that has no source behind it. Users near the limits of any commercial frame should ask Hoist directly through us.
Can the weight stack be upgraded later?
Not on this model. Hoist lists optional add-on weight kits across its Roc-It and Dual Series machines, but publishes none for the CL-3102. Choose your resistance at order time and treat it as fixed.
What colors are available?
Hoist offers three frame finishes — Matte Black, Platinum and White — with eleven upholstery colors including Black, Dove Grey, Slate Grey, Burgundy, Sky Blue, Royal Blue, Hunter Green and Wheat. Color choices affect lead time, so confirm before ordering.
Which warranty tier applies to my gym?
That depends on the room, not the model. Hoist treats facilities charging membership dues as commercial, and facilities without dues serving under fifty people a day—hotels, apartment clubhouses, training studios—as light commercial. The CL line is covered under both.
Order the Hoist CL-3102 through Hamilton Home Fitness and put a curl station on your floor that keeps working when the pin on everything else goes missing. Browse the wider commercial strength equipment range if you are building out a full arm section, and speak to our Tennessee team about lead times and freight for your address.
Secure Payments
