The abs Company TireFlip 180® System

TireFlip 180 System: A Tire Flip Machine for Small Spaces

The TireFlip 180® System from The Abs Company is a tire flip machine that keeps tire-style training inside a compact footprint instead of a long flipping lane. It starts at 100 lb, loads to 160 lb with the included plates, and suits studios, small-group programs and well-equipped home gyms.

What this tire flip machine does

It gives you the drive-and-lift pattern of a tire flip in a fixed piece of equipment, so the movement stays in one place instead of travelling across your floor. The patented TireFlip 180 System is built as a functional training station, and The Abs Company describes it as delivering the benefits of tire training in a safe, space-saving design.

What is a tire flip machine? It is a purpose-built unit that recreates the tire flip movement without a loose tractor tire. You get a known starting weight, a defined training range, and a piece of equipment that belongs on a gym floor rather than in a parking lot.

Flipping is where it starts. The manufacturer states the system supports hundreds of exercises across strength, power and agility, which is why it tends to anchor a zone rather than sit alone in a corner. That makes it a natural fit alongside the rest of our cross training equipment.

The space question, answered

Three different numbers get called "the footprint," and only one of them is the space you actually train in. This is the detail most listings skip, and it is the one that decides whether the unit works in your room.

The spec sheet lists those three assembled figures without labelling which axis is which, so measure your intended spot against the largest number before you commit. The 4 x 5 ft figure is The Abs Company's stated space claim for the exercise range, not a measured frame dimension.

How much space does a tire flip machine need? More than the frame. You need room to set your stance, step around the unit between reps, and run the rope — and the included rope is 10 feet long on its own, so the rope lane is longer than the machine. If you are mapping a full room rather than one corner, our team can book a gym design around it.

Load range and who it fits

The system starts at 100 lb and climbs to 160 lb using the 60 lb of weight plates that come with it. Nothing extra to source, nothing to guess at.

• Starting weight: 100 lb, straight out of the crate
• Added plates: up to 60 lb, included
• Full training range: 100–160 lb
• Plate storage: 3 posts built into the unit

Is 160 pounds enough resistance? For circuit work, conditioning and mixed-ability groups, yes — that range covers beginners through most members. If your strongest users move well past 160 lb for repeat sets, check that ceiling first, because the standard system tops out there.

The 10' Battle Rope ST® is included as well, and The Abs Company positions that combination as suited to small group training. Rope color may vary. If you want longer or heavier rope options for the rest of the room, our battle ropes range covers those separately.

Key features

✅ Patented TireFlip 180 training system
✅ Starts at a 100 lb training weight
✅ Loads up to 160 lb with plates
✅ Includes 60 lb of added weight plates
✅ 3 storage posts hold plates off the floor
✅ Includes a 10 ft Battle Rope ST
✅ Suits small group training sessions
✅ Covers strength, power and agility work
✅ Compact 66 x 49 x 21 in assembled frame
✅ Sold under commercial workout machines
✅ SKU ABS4004-02, listed at $3,044.00
✅ Ships nationwide from Tennessee
✅ Sold by an authorized Abs Company dealer

Add it to your cart and build the training zone around it.

Machine vs a loose tractor tire

The honest comparison is control, not intensity. A scrap tire is cheap; a machine is predictable.

If your zone also needs a pushing or sprint element, the SledMill covers that pattern, while the aTAC HIIT Ergometer handles seatless metabolic intervals.

Who this suits

• Studios running small-group circuits
• Facilities short on functional floor space
• Trainers coaching mixed ability levels
• Home gyms with freight-friendly access

Who this does not suit

• Lifters needing more than 160 lb of load
• Rooms with no clearance around the frame
• Buyers who need a published unit weight
• Addresses a freight truck cannot reach

Full specifications

Every published figure sits here in the units the manufacturer supplied.

One gap worth naming plainly: the assembled product weight is not published on the manufacturer's spec sheet. The 472 lb figure is the shipping weight of the crated unit, so treat it as a delivery number rather than a floor-loading number.

Delivery and placement reality

This arrives as freight, not as a parcel. The crate measures 58"L x 32"W x 26"H and weighs 472 lb, which changes how you plan the delivery day.

• Crate width is 32 in — a standard door's exact width
• Plan a route with no tight turns or steps
• Have help ready to move it from the truck
• Check ceiling and lighting over the final spot

That 32-inch crate width deserves a second look. A standard interior door is also 32 inches, which leaves zero clearance, so measure your doorway, trim and hinges before delivery day rather than after. Full terms are on our shipping and returns page.

Hamilton Home Fitness ships across all 50 states from our Tennessee base as an authorized dealer for 40-plus brands, including The Abs Company. Order online, or call first if you want the delivery route confirmed before you buy.

Tire flip machine FAQs

What muscles does a tire flip work? The tire flip is a compound, full-body movement driven mainly by the legs and hips, with the back, shoulders, arms and grip working through the lift and push. Because it is explosive, technique coaching matters — check with a qualified trainer or your physician before adding it to a program.

Does the TireFlip 180 System come with weights? Yes. It includes up to 60 lbs of added weight plates, taking the training range from a 100 lb start to 160 lbs, with 3 storage posts on the unit for the plates you are not using.

Is the battle rope included? Yes, a 10' Battle Rope ST is part of the system, and The Abs Company positions that pairing as suited to small group training. Rope color may vary between shipments.

How much does the TireFlip 180 System weigh? The assembled weight is not published on the spec sheet. What is published is the shipping weight of 472 lb (215 kg) for the crated unit at 58"L x 32"W x 26"H.

Can more than one person train on it? It is built for that. The manufacturer positions the system and its included rope for small group training, which is why it works in circuits where users rotate through stations.

Is it suitable for beginners? The 100 lb starting weight is the entry point, and load only rises when you add plates. Start there, keep sessions coached, and add weight once the movement pattern is consistent.

Does Hamilton Home Fitness ship nationwide? Yes, we ship to all 50 states from Tennessee. Shipping terms vary by brand and product, so check the current terms for this item before you order.

Ready to add tire training?

Bring tire flips inside without giving up a lane of floor. The TireFlip 180 System is listed at $3,044.00 under SKU ABS4004-02, arrives with its plates and rope, and slots into a zone you can build around it.

Buy it today, or contact the team if you want the space and delivery details checked against your room first. You are ordering from an authorized dealer shipping nationwide from Tennessee, with support after the sale.