OXEFIT

OxeFit Gym Machine: Which System Fits Your Space and Goals

OxeFit builds AI-driven smart gym machines that replace weight stacks with robotic digital resistance. Hamilton Home Fitness carries two systems: the XS1 Peak at $8,600, a strength-cardio-Pilates platform for home use, and the XP1 at $42,600, a 400 lb commercial trainer for studios, teams, and performance facilities.

Most buyers arrive at this page with one question already forming: which one, and why the gap in price? That gap is not a trim level. The two machines solve different problems, and picking the wrong one is an expensive mistake at either end.

Below you get the verified numbers, the space you actually need, and a straight read on who each system serves. No guesswork.

How the OxeFit Gym Machine Works

An OxeFit machine loads you with motors instead of plates. Resistance is generated digitally and adjusted mid-set, so there is no stripping bars or hunting for the next dumbbell.

A force plate sits underfoot and reads balance and center of pressure while you lift. That data drives real-time feedback on asymmetry, power, and output — the kind of information a mirror cannot give you and most cable machines never measure.

The training modes go past simple weight selection. Both systems support concentric and eccentric overload, accommodating resistance, and perturbation work, letting the load shift within a single rep to match where you are strongest.

How is an OxeFit different from a cable machine? A cable machine gives you a fixed stack and no feedback. An OxeFit varies the load electronically inside the rep, tracks force output, and flags left-right imbalance as it happens. The mechanics feel familiar; the control and the data do not.

XS1 Peak vs XP1: What Separates Them

The XS1 Peak is the broader machine. The XP1 is the stronger one. That single line resolves most of the confusion.

Which One Fits You

Pick the XS1 Peak if variety and space efficiency matter more than raw ceiling. Rowing, canoe, kayak, paddleboard, surf-swim, and SkiCross all run on the same deck, and digitally controlled Pilates and mobility work sit alongside the strength library. For a household training three or four different ways, one machine covers all of them.

Pick the XP1 if the ceiling is the point. Four hundred pounds of robotic load, dual force plates for true bilateral and unilateral comparison, and a 43″ display built for coaching someone else through a session. Multi-user accounts, coach dashboards, and exportable data make it a working tool for a facility, not a household.

The honest version: If you are training yourself at home, the XP1 is more machine than you will use. If you are profiling athletes or running paid sessions, the XS1 Peak will run out of load before your strongest clients do.

Compare both systems side by side—view the Oxefit XS1 PEAK and the Oxefit XP1 with full specs and current pricing.

Space, Power, and Install Reality

Plan the room before you plan the workout. This is where most smart-gym buyers get caught out.

The XS1 Peak needs a minimum of 6′ × 8.5′ plus 4″ of clearance behind the unit. Unfolded, it runs 45.5″ wide, 80″ deep, and 81.5″ tall. Fold the deck and depth drops to 21.5″, which is what makes it workable in a living room or a shared space rather than a dedicated gym.

Weight is the other number people miss: roughly 300 lb. This is not a machine you shuffle around on moving day, and professional installation is recommended rather than optional.

Connectivity matters too. The XS1 Peak expects a strong 5 GHz WiFi signal and a climate-controlled indoor environment—a damp garage or an unheated basement is the wrong home for it. The XP1 runs from a standard 110–120 V outlet, so no electrical work is needed for a typical install.

How much space does an OxeFit need? For the XS1 Peak, budget a 6′ × 8.5′ footprint with 4″ behind the unit, and confirm your ceiling clears 81.5″. The XP1 uses a compact upright with a bench that glides and folds away between sessions.

Key Features

✅ Robotic digital resistance, no weight plates
✅ Force plate reads balance and asymmetry
✅ 250+ strength exercises on XS1 Peak
✅ Six cardio modes plus digital Pilates
✅ Up to 400 lb of load on the XP1
✅ 32″ and 43″ touchscreen interfaces
✅ Concentric and eccentric overload modes
✅ Accommodating resistance and perturbation
✅ XS1 deck folds to 21.5″ depth
✅ Standard 110–120 V outlet on XP1
✅ Multi-user profiles and coach dashboards
✅ Exportable training data for trainers

How much does an OxeFit gym machine cost? At Hamilton Home Fitness, the XS1 Peak is $8,600, and the XP1 is $42,600. Both prices are listed openly on their product pages, which is not true of every OxeFit seller — several require an appointment before quoting a figure.

Who Each System Suits Best

Home buyers with limited floor space get the most from the XS1 Peak. It folds, it covers strength and cardio and Pilates, and it removes the need for a rack, a stack, and a separate cardio unit competing for the same corner.

Trainers and studio owners tend to land on the XP1. Load ceiling, dual-plate profiling, and per-client data export turn it into a revenue tool rather than an amenity—you can show a client their numbers instead of describing them.

Teams and performance facilities use the XP1 for the same reason, with the added benefit of multi-user accounts that keep athlete histories separate. If you are outfitting a full floor around it, our commercial fitness equipment range covers what sits alongside.

Does the OxeFit replace a full home gym? For most home users, largely yes—the XS1 Peak handles strength, six cardio modes, and Pilates in one footprint. Buyers who want heavy barbell work usually keep a rack, and you can browse the rest of our home workout machines to see how an OxeFit fits into a wider setup.

What Buyers Ask Before Ordering

Is a membership required to use an OxeFit machine?
Membership terms vary by model and package, so confirm the current requirement with our team before you order. Ask specifically about commitment length, billing, and what functionality remains if a membership lapses. Getting this in writing up front avoids the most common surprise on a purchase this size.

Can more than one person train on the same OxeFit?
Yes. Both systems support separate user profiles, and the XP1 adds coach dashboards and multi-user account management. Training histories stay separate, so two people in the same household — or twelve clients in the same studio — do not overwrite each other's data.

Is the XP1 built for commercial gym traffic?
It is specified for commercial use, with multi-user accounts, exportable data, and a 400 lb load ceiling suited to repeated daily sessions. Facilities also gain the dual force plates for balance and asymmetry profiling. For sizing a full commercial floor plan, our team can walk through the layout and unit count.

Do I need professional installation?
Professional installation is recommended for the XS1 Peak given its 300 lb weight and setup requirements. The XP1 needs only a standard 110–120 V outlet and standard door clearance during delivery. Talk to us about install options for your specific room before the machine ships.

Does Hamilton Home Fitness ship OxeFit nationwide?
Yes—we ship across all 50 US states from our Tennessee base. Delivery timing and access requirements vary by model and location, so confirm details for your address when you order.

Can I get a quote before buying the XP1?
Absolutely. At this level, most buyers want to talk through configuration, room specs, and delivery access before committing. Reach out, and we will map the machine to your space rather than the other way around.

Start Your OxeFit Order

Both OxeFit systems are available now through Hamilton Home Fitness, with pricing published openly and no appointment needed to see the numbers.

Order the Oxefit XS1 PEAK at $8,600 if you want the widest training range in the smallest footprint. Choose the Oxefit XP1 at $42,600 if you need the load ceiling and the client-facing data.

Not sure which fits your room? Book a gym design consultation and we will size the space, check access, and confirm the right model before you spend a dollar. Nationwide shipping across all 50 states and a team that answers the phone.